Last updated: April 23, 2026
Furnace repair in San Diego County typically runs $200 to $900, starting with an $89 diagnostic that gets credited toward the fix. Ignitor and flame sensor problems make up most of the cheap end. A cracked heat exchanger is the one repair that usually means it's time to talk about replacement instead.
The bungalow blocks around 30th Street, Ray Street, and the Burlingame historic district run tight attics and no original ducts, which makes ductless mini-splits the practical path in many homes. The mixed-use infill along University Avenue and El Cajon Boulevard is per-unit air-handler and condenser work instead. Parts of Burlingame sit in a historic-review overlay, so line-set routing has to stay concealed.
The dominant job is either a first-time central system on a home that never had ducts, or a ductless mini-split retrofit where running new ductwork through a historic house is impractical. Older electrical panels usually need a look before any condenser upgrade, and parts of these neighborhoods sit in historic-review districts.
A furnace repair under roughly $500 on a unit less than 12 years old is almost always the right call. A cracked heat exchanger is different. It's a safety issue, not just a repair line item, because a cracked exchanger can leak combustion gases into the home. On a furnace old enough to need one, we usually recommend replacement over repair, and we explain exactly why before you spend money either way.
The $89 diagnostic gets credited toward the repair once you approve it. SDG&E and TECH Clean California rebates apply to new equipment, not repairs, so they come into play only if a repair turns into a replacement conversation, most often after a heat exchanger fails. We offer financing for larger repairs, and we'll tell you plainly when a repair isn't worth it anymore.
Most North Park homes land in the $200 to $900 range. A large share of North Park homes never had ductwork, so the common jobs are first-time central heat-pump installs and ductless mini-split retrofits, with older 100-amp panels frequently needing an upgrade before a condenser goes in., which is the main thing that moves the number here.
Central San Diego furnaces are often original equipment in older homes, so the repair-vs-replace line gets crossed more often here. When a repair still makes sense, ignition failures and cracked flame sensors are the usual ticket, priced at the county standard.
$200 to $900 covers most repairs, including the $89 diagnostic that gets credited toward the fix. Ignitor and flame sensor issues run under $500. A gas valve, control board, or blower motor runs $400 to $900.
Usually yes if the repair is under $500 and the furnace is less than 12 years old. A cracked heat exchanger is the exception. That's a safety issue, and on an older furnace we typically recommend replacement instead.
A flame sensor cleaning or replacement is usually the least expensive fix, typically $150 to $350, and it's one of the most common reasons a furnace shuts off right after lighting.
A heat exchanger replacement runs $1,500 to $3,500 and is the most expensive single repair. Because of the safety issue involved and the age of furnaces that usually need one, we walk through the full replacement cost alongside it.
No trip fee, no surprise line items. We confirm the price before any work starts.