The do I need a permit page answers whether the next job needs a permit. This page is the other question: the condenser, furnace, package unit, or mini split is already in, and nobody pulled one. Title companies, buyers, and insurers look for that gap. The fix is not a blog fee table. It is a licensed contractor, the right application at the Authority Having Jurisdiction, and an inspection.

Climate Pros SD matches you with licensed HVAC companies. We do not pull permits, set penalties, or inspect work.

A San Diego homeowner at a kitchen table reviewing HVAC photos and permit paperwork

What does “after the fact” actually mean?

It means the equipment is already installed, replaced, or added, and the city or county has no closed mechanical permit for that work. It is not the same as a capacitor swap, a drain flush, or a like-for-like thermostat on existing wires. Those repairs usually do not need a permit. A new outdoor unit, a new furnace, a wall heater, or new ducts do.

This page does not publish a penalty dollar amount. The existing permit guide already says penalty amounts come from the jurisdiction. Confirm current fees and any after-the-fact process with the counter that covers your address.

What is the City of San Diego path?

Inside the City of San Diego, mechanical work needs a permit unless an exemption applies. Simple No-Plan MEP can cover furnace, FAU, AC, wall heater, heat pump package unit, and mini-split installs on single-family homes and duplexes that are not historic. Historic or potentially historic sites need plans. Multi-family and commercial use a different record type.

If the existing work would have qualified for Simple MEP, a licensed contractor may still be able to apply for that permit and schedule inspection. If the install is wrong (wrong vent, illegal side-yard pad, no ECC/HERS path when required, undocumented electrical), the inspector can require corrections. That can mean opening walls, moving a pad, or replacing equipment. Nobody on this page can promise a pass.

Other cities and the unincorporated county have their own portals. Do not mail a City of San Diego form to Oceanside or El Cajon.

What should you gather before you call?

  • Photos of the outdoor unit, indoor cabinet, rating plates, and disconnect
  • Any invoice or contractor name from the original job
  • Whether the house is in a historic district (City IB-581 covers designated historic review)
  • Whether ducts were added in the attic (IB-103 flags HERS/ECC when more than 40 feet of new duct is in unconditioned space)

If you smell gas, stop this process. Leave and follow the furnace gas-smell protocol.

Who pulls the permit?

The matched licensed contractor. Owner-builder is a separate City form (DS-3042) and is not a way to skip a license on HVAC that needs a C-20. Climate Pros SD is a referral line. We match you. We do not file the application.

Call (442) 777-6440. Tell the operator the city, what was installed, and that you need after-the-fact permitting, not a new sales pitch.